Tips For Hardwood Floor Buffing
Wood floor buffing is a process used to restore a worn finish. The process can hide minor scratches and blemishes. If the damage is deep, however, or the floor has splintered, the floor may require refinishing. The process is often recommended by flooring professionals for these reasons. If you have a worn floor, it is important to buff it to bring out the best in its appearance.
While refinishing are good options for old, worn floors, you can also try buffing. This DIY option is not nearly as messy and complex as refinishing. When done properly, hardwood floor buffing will bring back the floor’s lustrous sheen and enhance the appeal of your home. Here are some tips for hardwood floor buffing:
Before beginning the process, you must remove any wax from the floor. Use a wax stripper or mineral spirits to remove old compounds. Make sure to wash off the floor before applying the polish. The mineral spirit can be harmful for people. The buffing process may require more than one pass over the floor. If you wish to buff the entire floor, use a low-odor mineral spirit. The buffer should also have polishing and buffing pads and a screen. Control the direction of the buffing machine using the handle.
Another way to buff a hardwood floor is to remove the wax layer. This can be done with a wax stripper or mineral spirits, which can be hazardous. This method will remove the layer and leave the wood intact, which will increase the floor’s durability and protect it from everyday wear and tear. To determine which type of buffing service will be best for your floors, you should consider the traffic level of the room. For example, if there is a lot of traffic in the room, you may want to buff only the highest-trafficked areas, such as the stairs and the hall.
Another method of wood floor buffing is using a machine to remove minor scuffs and scratches. Buffing a floor is an effective way to restore its luster and hide scratches. However, if your floor is already stained or finished, buffing will not do much to protect it from damage. It’s best to get hardwood floor buffing done by a professional, since this process will require less time than traditional sanding.
It’s best to do hardwood floor buffing on a full room or area, rather than just an isolated area. Screening is much cleaner than sanding and can last anywhere from an hour to a half day or more. This is followed by one coat of polyurethane, either oil or water-based. A buffer contains embedded abrasive particles that help the new coat of polyurethane bond properly to the previous layer.
Although it’s not advisable to sand or refinish your wood floors, buffing is an effective alternative to sanding. While buffing is more expensive than sanding, it is still a great way to improve the overall appearance of a wood floor and correct any issues that might exist. While buffing can improve the overall look of a wood floor, it is not a substitute for refinishing. However, it is better than sanding, if you want to avoid having to worry about damaging your floors.