Hardwood floors are a great addition to any home, but like anything else, they can require some extra attention in order for them to look their best. Hardwood floor buffing, is a common method of maintaining your hardwood floors that prevents you from refinishing and re-sealing your floors. By using hardwood floor buffing methods you will prevent your wood floors from looking completely stained and dingy. What it does is gently remove surface dirt and dust while giving your floors a nice shine. This process does not penetrate the through into the actual lumber, and it does not change the color or stain.
There are many different hardwood floor buffing systems available in your local hardware store or online. Hardwood floor buffer systems can be purchased in both portable and stationary units. The majority of these buffing machines use either paper or polishing pads to apply the wax or polish onto your flooring. Paper pads are recommended over the hard plastic pads as they do not pull the wax into the carpet. Paper pads can also help remove surface dirt which could lead to unsightly stains.
Polishing pads are the most commonly used hardwood floor buffing systems because of their ease of use and ability to provide a highly polished look. With a variety of hardwood flooring styles to choose from, there is sure to be one to match the style of your home. Polishing pads can also provide a highly polished finish to those stubborn stains that you just can’t get out with a simple scrubbing.
Hardwood floors that need some extra attention due to the fact they have been damaged from heavy furniture and children might need hardwood floor buffing to restore the luster of the floor. There are two methods of refinishing hardwood floors; sanding and polishing. Both of these methods can leave marks and dull areas on the floor. Hardwood floors that have been sanded might require an extra coat of protection to prevent dust from starting new stains.
If the floors have been buffed but have noticeable scratches, you can bring them back to near new with the right coat of finish. To refinish hardwood floors that have been scratched, you will need to purchase a scratch restoring compound and a floor finisher. This method will require two coats of finish.
The most popular method of hardwood floor buffing involves the use of a power sanding machine. Power sanding machines are typically rented from flooring stores when you first start to install your flooring. These machines are equipped with rotary Sanders that allow the user to go through the entire floor in a fraction of the time it would take if using hand sanding methods. Because of the higher rate of speed that is used, power sanding floors always look fresh and new.
For deeper scratches, there are options for hardwood floor buffing that include using penetrating oil based dry lubricants. These penetrating liquids penetrate the wood floors, restoring their luster. Once the luster has been restored, the floors can be buffed again. This option is often used on unfinished wood floors or those that have had too many deep scratches repaired.
When you are doing hardwood floor buffing yourself, you must take into consideration that the task can become dangerous. Hardwood floors can be quite heavy, so you should not try to do this job if you are not physically fit. You should also wear thick-soled shoes and sand paper only on the non-slip surfaces of the floors. Also, wear rubber soled gloves so that you do not slip or slide on the sandpaper while you are working. If any part of the floor becomes scratched, wipe the area with a damp cloth and then buff the scratches out.