How Often Should You Buff Your Hardwood Floor?

If you have a hardwood floor, you might be wondering how often it is necessary to buff it. Hardwood buffing is a great way to extend the life of your wood floor planks. However, it is important to remember that sanding can make your floor planks wear out faster. Fortunately, buffing your floor can extend the life of your planks and make them ready for another coat of stain later.

To use a floor buffer, you must have polishing pads and buffing pads. Using the buffer, apply a moderate amount of pressure and work your way across the room in a clockwise motion. When working on a larger floor, you may want to repeat a section by overlapping the previous run. You should also allow a minimum of 24 hours to return furniture to the room after buffing. After that, light footfall should not pose a problem.

Depending on the amount of traffic, hardwood floors should be buffed every three to five years. However, not all hardwood floors can be candidates for screen and re-coating. Most of them already have too much damage to be eligible for screen-and-recoat. To avoid such problems, you should consider a floor refinishing company. You’ll want to be certain about the products they use and their compatibility with each other.

Before you begin buffing, you should first remove any wax from the floor. You can do this with a chemical called mineral spirits, but it is important to keep in mind that this is harmful for human health. You may also want to use a rotary polisher to create a sanded finish. To remove any wax layers from your hardwood floor, use mineral spirits or a wax stripper. This is an easy task that is not difficult to do.

Buffing hardwood floors can restore the shine of your old, worn out floors. This method doesn’t require sanding or re-staining, but it is quick and easy to do. It is also less disruptive than a complete overhaul. And unlike staining or re-staining, it doesn’t involve a lot of waste. Unlike sanding, buffing removes a minimal amount of finish and ensures your hardwood floors have a longer life span.

The machine you use for hardwood floor buffing has impressive power and speeds. Before you start buffing, you should apply finishing solution using a spray applicator or a mop. The finishing solution is applied evenly and lightly and is especially useful for large areas. Several coats of finishing solution can help achieve a shiny finish. You can even use a second spray to create a glossy shine. If you are not a professional, consider hiring a professional.

While refinishing your hardwood floor requires a professional to apply the final coat of polyurethane, screening is a better option. It is cleaner and less expensive than sanding, and it can take anywhere from an hour to a day, depending on the area. It will require one coat of either water-based or oil-based polyurethane. To buff your hardwood floors, you will need a buffer that contains abrasive particles. This will allow the new coat of polyurethane to bond properly.