Hardwood Floor Wax Removal – What You Need To Do

Hardwood floor wax is an excellent way to protect your floor and provide a rich, deep color. Hardwood floor wax can be used for both new and existing floors. Hardwood floor wax provides many benefits and should be carefully applied. This article offers some basic information that will help you learn how to apply hardwood floor wax and what to look for in the finished product. Hardwood floor wax is available in two versions: one percent and two percent.

Hardwood floor wax removal|Hardwood floor wax removal

Hardwood Floor Wax Removal – What You Need To Do

Hardwood floor wax is an excellent way to protect your floor and provide a rich, deep color. Hardwood floor wax can be used for both new and existing floors. Hardwood floor wax provides many benefits and should be carefully applied. This article offers some basic information that will help you learn how to apply hardwood floor wax and what to look for in the finished product. Hardwood floor wax is available in two versions: one percent and two percent.

}

Two percent is the most common form of waxed hardwood floor coating. One percent provides a good base to which you can add color. A light sanding and a few passes with a fine-grit cloth will provide a beautiful shine. Hardwood floor wax in this form is not very dense, so it will not provide the same protection as heavier grades.

Two percent hardwood floor wax is not heavy enough to provide a protective coating for your entire floor. If you are applying floor wax to your entire floor, you will want to apply it along the perimeter of your room, around windows, doors, skylights, vents and other points that are highly susceptible to moisture or damage. You may need to do more than one pass over each area. Be sure to allow the wax to dry completely before removing any excess.

Be careful about where you are applying your hardwood finish. Hardwood floors can be damaged by spills, by abrading into the wood, by sanding improperly and by using too much pressure during removal. If you must apply your finish near a corner or towards the edge of a room, use a clean damp sponge or rag to spread the wax evenly and to avoid damage.

The easiest way to apply hardwood floor wax is to sweep the floor with a soft, dry mop. Make sure to remove all dust particles and to clean up any spills before applying the finish. Using a cotton rag, wipe down the entire floor, making sure to include the corners, edges, door and windows. Once you have finished your sweeping, dampen a clean sponge with a drop of water from your dispenser before applying the wax. Make sure the finish is dry before removing it from your floor.

It is easier to remove old hardwood floor wax than it is to create new one. If you find an area in your room that has never had wax applied, you can sand the floor and remove any excess wax. This can be a tedious process, but wax removal does not have to be a difficult chore if you have the right tools. Sanding the floor smooth will make it easier to apply your new finish. Once you have your sanded surfaces ready, you can apply the wax in small batches.

Hardwood floor wax helps protect your floors from scratches, wear and tear, and other possible damage. Since it is still somewhat sticky, you may want to use a little bit of water-based cleaning product to help it slide more easily over your wooden surface. Wipe down the entire floor, making sure to include the corners and any rough spots. If the area you are working on has any raised nail heads or uneven boards, you may need to use special tools to tap them out or simply apply a little extra pressure when wiping the floor down. The goal is to make your hardwood floor wax removal process as easy as possible.

Once you have your waxed surfaces prepared, you will need to let the floors sit for a few days to allow the wax to soak in. You can buff your floors to restore shine and even out the wood grain. Cleaning with a wax remover can be messy, but it is also an important step to removing the wax so that your hardwood floor can be cared for properly. Let the process dry completely before restoring your floorboards.