Hardwood Floor Buffing Tips
When it comes to maintaining hardwood floors, it is important to consider a few things before committing to a refinishing project. Unless you plan on spending a lot of money on a refinishing job, buffing is a great way to extend the life of your flooring. It will also prevent you from having to sand and repaint your floors in the future. Here are a few tips to help you decide which type of hardwood floor buffing will work best for you.
First of all, you should consider the location of your electrical outlet. The position of the outlet is essential in determining the best place to start the process. It is important to allow at least 24 hours for your floor to dry completely before moving back any furniture. In general, light footfall should not be a problem after that. You may want to buff the floor twice. If you notice a significant difference, you should replace the polish pad.
Next, you should test the water-drop test on a small section of your floor to determine if it needs to be polished. If your hardwood floor absorbs water, it needs to be refinished. If it doesn’t, it has a paste wax finish. If it doesn’t, you can test the finish by wiping it with a fine steel wool. If it leaves a waxy film on the steel wool, it needs to be buffed.
Before buffing your hardwood floor, make sure you are using protective gloves, eye protection, and a respirator mask. It is a relatively simple procedure that can restore the luster of your flooring without a lot of trouble. But remember that this process requires expertise and you should be safe and hire a professional. After all, it is much more cost-effective than replacing your floors! There are many benefits to hardwood floor buffing.
While sanding a floor is the most time-consuming and expensive step, screening is the cleanest and fastest way to restore the original beauty of your floors. The process usually takes about an hour or half a day, depending on the size of the area. Once the screening process is complete, you can apply one or two coats of polyurethane to achieve the desired results. In both cases, a buffer is used after sanding to ensure proper bonding of the new coat of polyurethane.
Another option for refinishing your hardwood floor is buff and recoat. A buff and recoat process involves light scuffing to prepare the surface of your current finish for another coat. This method may be ideal for dull, uneven, or worn floors. However, re-coating doesn’t remove deep scratches, gouges, or stains. Recoat does not work on all types of floors, and if you like the look of your floor in this basic state, you may be fine with it.
When to buff and coat your hardwood floors, be sure to choose a professional who will do a thorough job. If your floors have been exposed to a lot of traffic, the polyurethane coating will wear off. You can also determine when to buff your floors by looking for scuff marks and mild gauges. However, be sure to consider the type of traffic the floors receive before deciding on a schedule. A high traffic area may require annual buffing, while a low-traffic room could only require a once-or-two-year buff and coat.
Before a professional hardwood floor buffing job, you should understand the difference between a screen and recoat process. Using the same technique will make your floors look different, even if they have been polished before. Depending on the type of wood used for your floors, you can expect a more or less matte or semi-gloss finish after the process. The difference between the two types of refinishing is the sheen.
While refinishing and sanding are typically the two most popular methods for restoring damaged floors, buffing is an excellent option for small areas. Buffing will address damage in the sealant layer and will restore the luster of your floor. Likewise, it’s important to clean your floors regularly with the proper tools to prevent further damage to the floor. The best way to keep your floors in good condition is to clean them on a weekly basis.