Hardwood Floor Buffing – Essential Tips and Tricks

Hardwood floor buffing is a simple method of frequent hardwood floor care that avoids you from fully refinishing and re-sanding your floors to their original color and condition. This simple method does not penetrate the surface of the wood, and it does not alter the existing natural color or stain. You can simply make use of this simple floor care process as often as you want and still ensure the durability of your floor. It simply means that you will continue to enjoy its beautiful appearance for many years.

Some homeowners think that they can avoid hardwood floor refinishing because they have already done the job once. What they do not know is that they can also perform hardwood floors refinishing or they can still hire a professional service provider for the job. It depends on how much you really value the quality of your hardwood floors. Refinishing is very easy but it can also be very costly. If you are on a tight budget, you can always go for the less expensive option such as the buffing.

Although there are numerous ways on how you can do hardwood floor buffing, you need to consider a number of factors before taking the matter into your own hands. First is to consider the type of material you have for your floors. There are different types of refinished hardwood floors, and each one has distinct characteristics that make them different. The most common types are the ones made of solid wood. While you can always use other materials on your floors, solid wood requires more maintenance, thus it is more expensive.

If you have wooden floors, you may opt to have the more affordable way of hardwood floor buffing by using a good buffing compound. This is great for light scratches and blotches on your floors as it will remove the scratches and stains without having to do major refinishing. However, you have to make sure that you buy a commercial grade compound or one that has been designed for light scratches and blotches. These types usually have higher levels of antioxidants that can prevent any more damage from occurring on your floors.

For extremely badly stained or dull floors, you can still do hardwood floor buffing even with light or minor scratches. What you can do then is to either sand or use a power sander to get rid of the scratch or mark. But be sure to avoid sanding too deeply as this will cause the finish to wear off faster than if you had simply sanded lightly. Instead, you can also use chemical cleaners to remove any remaining finish enhancers that could end up causing your floors to become discolored or dull. Chemical cleaners are best suited for minor scratches or scuff marks, and they are quite affordable.

When you’re polishing your hardwood flooring, you don’t have to stop with just the finish. There are still several ways you can polish your flooring that won’t damage your flooring or scratch it at all. If you’re only doing light scrubbing on an occasional basis, you can still wax your flooring using wax strips or a microfiber mop. Microfibers are especially good for hardwood floor buffing as they are soft and sensitive enough to not damage the finish underneath.

When your hardwood floor buffing your first coat, you have to be extra careful not to apply too much polyurethane or varnish to your floor. When applying polyurethane or varnish, always put a very light coating on the surface of the floor. Using a heavy coating too often can cause the sealant to start flaking off. If you do have to apply a heavy coat of varnish or polyurethane, make sure you let it dry for a minimum of 2 hours before walking on it.

The last but not the least important part of hardwood floor buffing involves actually sanding the floor. When you’re sanding, never simply scrape your wood flooring or try to chip away at it from the edges. Always start by sanding the floor smooth until you get a smooth, even finish.