Hardwood Floor Buffing and Coating

When hardwood floors are installed, buffing is often a necessary part of the maintenance process. Before buffing, the floor must be properly cleaned. To remove old compounds, you can use mineral spirits or wax stripper. These chemicals can be hazardous to human health. Mineral spirits should only be used when it is safe to do so. The next step is buffing the floor with a rotary polisher. A floor buffer with a screen and control handles should be used to ensure the best results.

Generally, hardwood floor buffing and coating should be done every three to four months. This is because frequent buffing helps to protect the integrity of the floor. Buffing also adds a protective coat to the wood. Frequent maintenance ensures that the coating remains intact. Further, a professional buffing job is more likely to remove scratches and stains than a DIY job. If the damage is severe, however, you will have to perform a full sanding and refinishing process.

Buffing hardwood floors is a popular home improvement service that can be performed without a lot of money. It can restore a floor’s luster and hide scratches. However, it should be done by a professional. There are safety precautions to follow when you perform this task. Work gloves, protective glasses, and a respirator are recommended for the job. You can also choose to hire a professional company if you don’t have the time or money to do it yourself.

When you think of hardwood floor refinishing, you probably think of sanding and refinishing services. However, buffing is an alternative to sanding because it does not thin out the wood and will last for a longer time. If you are in a hurry, you may want to consider a weekly cleaning instead. You can use the tools and products to perform buffing yourself, but it is still best to hire a professional.

The two most common methods of restoring a wood floor are sanding and buffing. The latter process involves removing a thin layer of the protective finish to expose the bare wood beneath. However, sanding is necessary if you notice deeper scratches or dents. While sanding restores the surface of the wood, it opens up the wood’s pores and allows sealants and finishing products to penetrate them more effectively.