Hardwood Floor Buffing

What exactly is Hardwood Floor Buffing? Hardwood floor buffing is actually a more extensive method of regular hardwood floor care which prevents you from refinishing and re-sanding your wood floors to the point that they are look old and worn out. This procedure, while less effective in the long run, can be done very inexpensively. The process of Hardwood Floor Buffing involves chemically stripping the old top coat of your flooring, as well as the new bottom coat. Both coats require to be buffed together to ensure even coating of your hardwood floors.

Hardwood floor buffing|Hardwood floor buffing

Hardwood Floor Buffing

What exactly is Hardwood Floor Buffing? Hardwood floor buffing is actually a more extensive method of regular hardwood floor care which prevents you from refinishing and re-sanding your wood floors to the point that they are look old and worn out. This procedure, while less effective in the long run, can be done very inexpensively. The process of Hardwood Floor Buffing involves chemically stripping the old top coat of your flooring, as well as the new bottom coat. Both coats require to be buffed together to ensure even coating of your hardwood floors.

}

With the older wooden floors, you could just buff them down with a normal furniture wax. With today’s modern technology, this process is done a couple different ways. One way to hardwood floor buffing involves using specialized chemical strippers. These strippers are usually applied to all the edges of your floors, and then left to sit for awhile.

Once the chemicals have sat long enough, they are used to break apart the particles within the wood. As the stripper eats away at the particles, they are released into the air, and thus cause even more spotting on your hardwood floors. Sometimes, the spots that are left will be even more pronounced than before. This is why it is very important to use the proper methods when hardwood floor buffing. The wrong method used can end up destroying your floors instead of simply taking off any of the scratches.

Another common way to hardwood floor buffing is done by using a machine called a “sanding press.” This machine consists of a drum or table which has a number of rotating sanding disks. The “sandpaper” is simply what is applied to the floor. While this method may work well for some types of wood flooring, it is not something that you should do on a regular basis.

If you are going to use the sanding method for hardwood floor buffing, it is important to know that the method should only be performed on freshly sanded floors. Sanding old floors only makes the situation worse. Sanding floors before refinishing causes imperfections in the surface of the flooring. Not only does this leave a need for additional sanding after the refinishing process has been completed, but it also takes away from the brightness of the original color. Hardwood floors dry out and lose their luster over time, and you will not be able to restore them without refinishing.

Another good way to remove deep scratches from hardwood floors without having to refinish is with a substance known as an epoxy. Epoxies are excellent at removing deep scratches without actually having to sand the entire floor. An epoxy is applied to the scratch and allowed to penetrate through small cracks in the wood flooring. Once the epoxy has soaked into the deep scratch, it is scraped away with a fine-toothed scraper. This leaves your floors looking like they just came off the floor.

Another option for hardwood floor buffing that is less common but can be much more effective is using an oil-based refinisher. These are much easier to apply, especially if you want to remove small areas of finish. The liquid is applied to the areas you want to refinish in thin layers. Once the first layer is dry, you can apply another thin layer until you have the luster level you want. Oil-based finishes are far less harsh than their water-based counterparts, so they can easily be used on floors that are still wet from mopping.

It’s also possible to combine hardwood floor refinishing and hardwood floor buffing to improve the luster of your floors. For example, you can refinish your floors and then use a micro fibre refinisher on them to give them a sparkling finish. Both finishing techniques can also be used on unfinished hardwood floors to give them a beautiful shine while protecting the wood. Hardwood floors are a great addition to any home, but they can take some extra care to keep them looking great. Hardwood floors are also one of the most popular choices among homeowners when it comes to flooring material, so there’s no reason to think that you can’t find a great finish for your floors either.