Hardwood Floor Buffing

Hardwood floor buffing & finishing is usually done to prepare the wooden floor before you apply a high-gloss coating of polyurethane, that’s intended to protect the wood and also make it have a rich sheen. Floor buffing prevents the wood from becoming dull and patchy. It also brightens up the whole floor and restores the original look of the wood. Moreover, it improves the durability of the floors and increases their lifespan.

Hardwood floor buffing|Hardwood floor buffing

Hardwood Floor Buffing

Hardwood floor buffing & finishing is usually done to prepare the wooden floor before you apply a high-gloss coating of polyurethane, that’s intended to protect the wood and also make it have a rich sheen. Floor buffing prevents the wood from becoming dull and patchy. It also brightens up the whole floor and restores the original look of the wood. Moreover, it improves the durability of the floors and increases their lifespan.

}

In order to perform hardwood floor buffing or refinishing, several steps are involved. First, you have to remove the existing floor coating. If possible, use a vacuum cleaner with a brush attachment to remove the top layer of the old coating. You can use a wet/dry vacuum or a rotary brush with a wide-toothed attachment for this purpose. It is always advisable to have your floor mats or carpet ready for this purpose.

After removing the top layer of the floors, you have to start the job by sanding them thoroughly using medium-grit sandpaper. This ensures that all the small particles of glue and dirt are removed from the surface of the floors. After sanding the floors, they are then given a second coat of polyurethane to protect them from weathering. This coat service is one of the most important parts of the entire hardwood floor buffing process.

Polishing hardwood flooring is a third step in the process. There are two types of polishing – wet-sanding and dry-sanding. Wet-sanding involves using a water jet machine and applying the coating of your choice onto the floors. On the other hand, dry-sanding entails spraying the flooring with a chemical-laden solution that removes excess glue and dirt particles. However, both of these methods are only recommended for surfaces that do not bear too much pressure.

Once the floors are polished, they need to be given a protective finish to prevent any damage during transport or storage. The first step is to remove all the debris from the floors, including the ones that get embedded into the nooks and crevices of the hardwood floor buffing machines. For this purpose, it is advisable to use compressed air. Once the floors are clean and free of debris, place the finishing nails on the wood flooring and tack them tightly into place. Leave the nails in place until the complete finish is completed.

When it comes to repairing scratches and scuff marks, the main problem lies in getting rid of the scratch mark. This is a common problem in laminate floors and even in hardwood floors. For this reason, it is important to use the right cleaning products and equipment to avoid damaging the finish. Once you are done cleaning, apply the necessary finish. If there are still traces of scuff marks, there are chances that the original color of the wood may have been damaged, so it is advisable to replace the piece.

Hardwood floors often come with small cracks and grooves. These often appear when something is scratched, thus the term’scratches and grooves’. It is extremely important to treat these as soon as possible and not to let them go untreated for long. Before starting the hardwood floor buffing process, make sure the area is well ventilated and the surface is completely dry. It is best to use a power washer or a power sanding machine for this job.

Hardwood floor polishing services are usually carried out by professionals who are experts on the subject. The first step in the process includes removing all the furniture from the room. It is then necessary to take out all the drawers and cabinets in order to get the job done. The following step involves cleaning the dust particles that might be found in the drawers and cabinets. To complete the hardwood floor buffing process, the furniture is reassembled and the wood floor polish service is started.